基于可调光纤F-P滤波器解调的分布式光纤光栅传感系统

提出并实现了一种可满足工程实用要求的波分复用光纤光栅传感网络解决方案,系统通过可调谐光纤F-P滤波器的连续扫描实现波长信号的解调.该传感系统扫描带宽50 nm,单点工作带宽5 nm,对一般应用系统每根单纤可设20-30个点,系统最高扫描频率200 Hz,分辨率5 pm(约5με或0.5℃).     

金属泡沫断裂韧性的试验研究

金属泡沫在其实际应用中,断裂性能和断裂韧性对于承载的多孔金属泡沫有着重要的意义。基于美国试验材料学会相关标准,采用三点弯曲试样测定了铝泡沫的I型断裂韧性。研究表明,金属泡沫的断裂为脆性断裂,在裂纹尖端附近,孔壁最薄弱的区域最容易发生变形;随着进一步加载,一些孔壁发生断裂,微裂纹在断裂尖端附近出现。随着载荷的增加,主裂纹在缺口根部形成或由微裂纹合并而成,并开始在多孔结构内传播。裂纹沿着结构最薄弱处传播,并产生次生裂纹和裂纹桥。裂纹总的扩展方式还是I型断裂。根据试验P-V曲线特点,取最大载荷点对应的力与位移求解出铝泡沫的裂纹尖端临界张开位移的平均值为0.051 mm。     

典型线性火工分离装置作用过程数值模拟及试验研究

针对目前线性火工分离装置的优化设计主要依靠试验验证,成本高且设计优化迭代慢的问题,采用任意拉格朗日-欧拉方法建立典型线性火工分离装置的数值模型。通过火工分离试验和光子多普勒测速试验对上述数值模型进行验证,发现该数值模型具有较好的精度。使用该模型研究上述火工分离装置分离瞬态过程的力学机理,并定量分析多种因素对分离装置重点部位等效塑性应变等关键特征量的影响。研究发现,芯药线密度、分离板削弱槽底部的圆角半径对分离装置的作用过程有重大影响。此外,保护罩材质、削弱槽开口角度、分离板槽结构尺寸等因素对分离过程也有一定影响,但其影响相对较小。研究结果可以为典型线性火工分离装置的优化设计提供基础。     

Resistance of grid steel-tube-confined concrete targets against projectile impact: Experimental investigation and analytical engineering model

Steel-tube-confined concrete (STCC) targets are provided with excellent anti-penetration performance over semi-infinite concrete (SIC) targets since the steel tube imposes passive restraint on the in-filled concrete during the penetration process. Grid STCC system with square steel tubes is a potential solution to protective structures. In this paper, experiments of 9-cell grid STCC targets penetrated by 12.7 mm Armor Piercing Projectile (APP) were performed. The influence of side length and thickness of steel tube, steel ratio and impact velocity on anti-penetration performance were taken into account. Additionally, single-cell square STCC targets were also designed and tested for comparison with the 9-cell grid STCC targets. Damage modes and parameters of the tested targets were measured and discussed. Moreover, the stiffness of radial confinement of grid STCC targets is achieved according to the elastic solution of infinite cylindrical shell in Winkler medium. Furthermore, the penetration resistance and depth of penetration (DOP) for grid STCC targets are obtained on the basis of the dynamic finite spherical cavity-expansion (FSCE) models including radial confinement effect. It is shown that the 9-cell grid STCC targets with optimal dimension match of thickness and side length of steel tube can reduce the DOP by about 17 % and 23 % in comparison with the SIC targets and single-cell square STCC targets, respectively, due to both the confinement of square steel tube to concrete in the impacted cell and the additional confinement of the surrounding cells to the impacted cell; the penetration resistance and DOP of the grid and cellular STCC targets with similar steel ratio is close, and thus the grid STCC targets with simpler manufacturing process and excellent in-plane expandability are preferred in engineering practice; moreover, the predicted results of DOP model based on the FSCE models agree well with the tested results with the maximum disparity less than 12 % and the proposed model is more applicable to the grid and cellular STCC targets with high radial confinement.     

A pixel-level local contrast measure for infrared small target detection

Infrared (IR) small target detection is one of the key technologies of infrared search and track (IRST) systems. Existing methods have some limitations in detection performance, especially when the target size is irregular or the background is complex. In this paper, we propose a pixel-level local contrast measure (PLLCM), which can subdivide small targets and backgrounds at pixel level simultaneously. With pixel-level segmentation, the difference between the target and the background becomes more obvious, which helps to improve the detection performance. First, we design a multiscale sliding window to quickly extract candidate target pixels. Then, a local window based on random walker (RW) is designed for pixel-level target segmentation. After that, PLLCM incorporating probability weights and scale constraints is proposed to accurately measure local contrast and suppress various types of background interference. Finally, an adaptive threshold operation is applied to separate the target from the PLLCM enhanced map. Experimental results show that the proposed method has a higher detection rate and a lower false alarm rate than the baseline algorithms, while achieving a high speed.     

角度闪烁干扰对地空导弹火力拦截能力的影响

角度闪烁干扰对地空导弹火力拦截能力的影响,是电子对抗部队迫切需要解决却又缺乏系统研究的难题。为解决这一难点问题,首先在研究杀伤区纵深和掩护扇区受干扰变化的基础上,分析了双机闪烁干扰对地空导弹射击目标脱靶量及射击次数的影响,然后建立了角度闪烁干扰条件下地空导弹对目标的合成杀伤概率计算模型,最后通过算例验证模型的有效性,得出了具有实用价值的结论,可为空袭作战中作战效能评估提供参考。     

求解武器目标分配问题的改进粒子群算法

在建立多种类型武器目标分配模型的基础上,提出了一种求解该模型的改进粒子群算法。首先,定义粒子聚焦距离变化率,使惯性权重依据聚焦距离变化率自适应调整;其次,采用速度最大值线性递减的策略平衡算法收敛精度与全局寻优能力之间的矛盾;最后,粒子替换策略使算法改善了因自适应惯性权重的引入而造成收敛速度变慢的问题。仿真结果表明,提出模型和算法合理有效,算法收敛快,适合求解各种种群规模的武器目标分配问题。     

电子对抗电磁环境的矩阵对策评估方法

为提高复杂电磁环境下的作战能力,对其进行复杂度评估是必须首要解决的课题。在分析战场复杂电磁环境评估基本方法的基础上,提出了一种基于矩阵对策的战场复杂电磁环境评估方法,建立了评估的模型,并通过一个电子对抗训练的场景,合理构建了支付矩阵,验证了评估方法的有效性。该方法可以反映作战过程的动态变化,同时为作战决策提供依据,可以有效提高战场决策水平和作战训练水平。     

弹载北斗抗干扰天线系统分析与设计

首先分析了弹载北斗导航系统接收机抗干扰天线系统的军事需求,确立了总体设计方案,然后详细分析了硬件平台方案选择和软件算法技术实现方案,并进行了相关的比较和仿真,得出了一些有益的结论。该结论可为研究和设计基于北斗导航的抗干扰天线系统提供有益的参考。     

时间距离像消隐时弹头进动与结构参数估计

考虑弹道目标时间距离像存在消隐现象,提出了一种弹道目标微距离变化曲线断续时进动与结构参数提取方法。首先,建立了弹道中段目标宽带回波模型,推导了散射中心微距离变化曲线理论公式;其次,提取了时间距离像中各散射中心的微距离变化曲线,据此提出采用选点方法实现目标进动频率和平动参数联合估计,完成了弹道目标时间距离像的平动补偿;最后,利用扩展Hough变换方法进行补偿后断续微距离变化曲线的检测,基于各散射中心间的相对位置信息实现了弹道目标的结构参数提取。电磁仿真实验验证了该方法的有效性。